MENU
St Cloud Pressure Washing Pros logo
Edit Template

Free Online Quote

Just Fill It Out & We Will Get You A Quote
St Cloud Pressure Washing Pros logo
Edit Template
MENU
St Cloud Pressure Washing Pros logo
Edit Template

Free Online Quote

Just Fill It Out & We Will Get You A Quote
St Cloud Pressure Washing Pros logo
Edit Template

St. Cloud Pressure Washing Guide

Why Is the Sand Washing Out Between Pavers?

The Short Answer: Sand washes out between pavers when heavy rain, concentrated runoff or a pressure washer aimed into the joints carries loose sand away faster than it can settle. Paver makers warn that empty joints let the bedding sand underneath escape too, so pavers settle and shift. In Kissimmee, where summer storms hit hard, a professional crew cleans at controlled pressure, refills the joints with fresh sand and seals over them to hold it in place.

In This Guide

What Pulls Sand Out of Paver Joints?

Moving water does most of it. One paver manufacturer explains that heavy rainfall and concentrated runoff can slowly carry loose sand away, especially where water repeatedly flows across the same area.

Look for the pattern on the ground. Joints go empty first below a downspout, along the low edge of a pool deck and where a sloped driveway sheds water into the street. Flat areas away from the roofline often stay full for years.

Slope speeds things up. A second manufacturer’s care guide notes that on very sloped installations, the sand can potentially wash out of the joints. Every storm then sends a little more toward the gutter line.

New patios are the most exposed. That same guide says the joints are relatively porous during the first few months after installation, until water gradually consolidates the sand.

Weedy paver walkway before cleaning, paver sealing in St. Cloud, FL

Do Summer Storms Really Wash Away That Much Sand?

Over a season they can. The National Weather Service lists a normal 7.46 inches of rain for July in Orlando, and much of it falls in short, hard bursts that send sheets of water across pavers.

Roof runoff concentrates that water. One downspout can empty the rain from a big stretch of roofline onto a single patio corner, and the jet scours the same joints every afternoon from late May into fall.

The loss is gradual, which is why it surprises people. Nothing looks wrong after one storm. After a full wet season, though, a strip of joints can sit noticeably low and the pavers start to feel loose underfoot.

Around Kissimmee, the pool deck usually shows it first. Splash-out, deck drains and the roof edge of a screen enclosure all put water on the same few rows of pavers, so those joints get checked before anything else on a quote visit.

Can Pressure Washing Strip the Sand From Pavers?

Yes, if the stream is aimed wrong. Paver makers warn that excessive pressure directed into the joints may remove sand. One care guide says water should hit the surface at an angle not greater than 30º and across the diagonal, never parallel to the joints.

This is the most common way a cleaning goes bad. A narrow stream run straight down a joint line works like a shovel, and the gap that was full in the morning is empty by lunch.

St. Cloud Pressure Washing Pros cleans pavers at controlled pressure so the joint sand stays put. The crew keeps the spray moving across the pattern rather than along it. Whatever sand still comes loose is replaced the same visit when the job includes re-sanding and sealing.

Pavers rocking or joints sitting empty? We put the price in writing for free, usually within 24 hours. Call the crew at 407-600-6080 or request a written quote.

What Happens When Paver Joints Stay Empty?

The pavers lose their grip on each other. A paver manufacturer warns that joints need to be topped up with sand to prevent the sand-bedding layer below from washing out, causing the pavers to settle.

Once that bedding layer moves, the damage shows. Individual pavers rock, edges rise and trip feet, and low spots hold puddles after rain. Another manufacturer adds that settlement, drainage problems or loose edge restraints can allow pavers to shift, creating wider openings.

Empty joints invite other trouble too. Loose jointing sand is easier for ants to move while building nests, and leaves and soil collect in open gaps where windblown weed seeds can sprout. Full joints are the first defense against both.

Edges are the weak point. Where pavers meet the lawn or a planting bed, a failing edge restraint lets the outer rows creep outward and the joints behind them widen.

Paver close-up before and after cleaning and sealing, paver sealing in St. Cloud, FL

How Does Re-Sanding Before Sealing Lock the Joints?

Fresh sand fills the gaps and the sealer binds the top of it. Cleaning, drying, re-sanding and sealing in that order gives the joints a firm surface that resists the next round of storms.

Order is everything here. Sand swept into wet joints clumps and settles unevenly, so the pavers have to dry fully first, and wet weather can mean a return visit. Sealing before the joints are full leaves soft spots the rain will find.

Pool decks deserve extra care. The care guide recommends polymeric jointing sand around swimming pools and any area subject to erosion, and a pool surround needs a finish that does not create a slip hazard.

The sealer does not replace good sand. It binds the very top of the joint so the next downpour and the next cleaning have a harder surface to work against, which slows the cycle that started the problem.

Who Fixes Washed-Out Paver Joints in Kissimmee?

St. Cloud Pressure Washing Pros cleans, refills and seals paver joints on Kissimmee driveways, patios and pool decks. A free written quote, usually within 24 hours, is based on photos or a visit to measure.

Kissimmee has a heavy short-term rental market, and many of those resort-style homes have private pools wrapped in pavers. A guest stubbing a toe on a raised paver is the last thing an owner wants, so joints there get checked closely between bookings.

Homes near Lake Tohopekaliga and in neighborhoods such as Buenaventura Lakes face the same summer storms. The crew is licensed and fully insured, and every job carries a full satisfaction guarantee. Learn about paver re-sanding and sealing, see the Kissimmee town page and pressure washing in St. Cloud, or call 407-600-6080.

Frequently Asked Questions

Yes, with care. The stream has to stay at a low angle and move across the joints rather than along them, and any joint that loses material is refilled before the pavers are sealed.
It depends on slope, runoff and how the pavers are cleaned. Joints below downspouts or on sloped drives may need topping up after a wet season, while flat, sealed areas can hold for years.
Usually not. Before sealing, pavers need oil, organic growth and old stains removed, so crews use a pre-treatment matched to the stain and controlled pressure that cleans without emptying the joints.
The product label sets the time, and it matters. Rain on freshly placed sand, especially polymeric sand, can wash it out or haze the surface, so crews schedule around the forecast.
Scroll to Top